With conventional semiconductor detectors, dark noise easily buries weak spectral lines at single-photon flux. Qumi-Spectra couples a high-resolution grating monochromator to an SNSPD and reconstructs spectra through precise wavelength scanning synchronized with photon counting, with native photon time-tagging and time-correlated measurement.
Qumi-Spectra single-photon spectrometer
- Previous:Qumi-Micro ultra-low-light microscopy system
- Next:None
Product details
Qumi · Single-photon imaging and spectroscopy
SNSPD sensitivity for high-resolution spectroscopy.
At single-photon flux, semiconductor detector dark noise can obscure weak spectral lines. Qumi-Spectra couples a high-resolution grating monochromator to an SNSPD, synchronising precision wavelength scanning with photon counting to reconstruct spectra, with native time tagging and time correlations.
The system covers 800–2200 nm, with sensitivity below −120 dBm and spectral resolution ≤0.1 nm. Low SNSPD dark counts enable weak-line detection without long integration. Applications include quantum sources, single-photon emitters, near-infrared fluorescence and fluorescence lifetime measurements.
Core capabilities
- A high-resolution grating monochromator is coupled to an SNSPD.
- Synchronised wavelength scanning and photon counting reconstruct weak spectra.
- Supports time tagging, time correlations and fluorescence lifetime measurements.
- Fibre or free-space input, with configurable gratings and slits.
System schematic

Technical specifications
| Parameter | Specification | Details |
|---|---|---|
| Wavelength band | 800–2200 nm | Multiband gratings; effective range depends on detector response, grating and coupling |
| Sensitivity limit | ≤ −120 dBm | At 1550 nm, −120 dBm input, 1 s integration per point: SNR >10 dB |
| Spectral resolution | ≤ 0.1 nm | Primarily determined by grating and slit configuration |
| Fine spectral detail | 10–20 pm | Spectral detail stably distinguished with the narrowest slit setting |
| Scanning method | Automatic stepped scanning | Minimum step 0.002 nm |
| Input coupling | Fibre / Free space | Single-mode/multimode fiber, fiber collimators, objectives and other coupling options |
| Spectral module | Monochromator | 320 mm focal length, f/4.1, triple-grating turret, motorized 0.002–2 mm slit |
| Acquisition module | NI board / TDC | Optional, based on requirements |
| Detection module | SNSPD | Typical SDE >80%, dark count <50 cps, timing jitter <100 ps |
| Control and data | Automatic acquisition | Wavelength scanning, integration settings, spectrum display, data saving and system calibration |
| Extensions | Time tagging for time correlations, lifetime measurements and related experiments |
Applications
Configuration and options
−120 dBm sensitivity applies at 1550 nm with 1 s integration per point and SNR >10 dB. Effective wavelength range and resolution depend on the detector, gratings, slit and coupling.
