PhotonSQUID dc SQUID electronics provide device bias, operating-point adjustment, open-loop amplification and flux-locked-loop (FLL) control. Standard products are PhotonSQUID-Ch1 and PhotonSQUID-Ch8, with scalable 8 × N channel configurations.
Home > Products > SQUID devices > SQUID
Product details
PHOTONSQUID · READOUT ELECTRONICS
From weak signals to clear readout
PhotonSQUID dc SQUID electronics provide device bias, operating-point adjustment, open-loop amplification and flux-locked-loop (FLL) control. Standard products are PhotonSQUID-Ch1 and PhotonSQUID-Ch8, with scalable 8 × N channel configurations.
<0.5 nV/√HzWhite voltage noise
>1 MHzOpen-loop bandwidth
>100 kHzClosed-loop FLL bandwidth
8 × NScalable channel count
Core functions
- Device bias: adjustable SQUID bias current and voltage.
- Operating point: configure electronics parameters in the control software.
- Open-loop amplification: maximum Amp-mode gain of 10000.
- FLL control: open-loop, closed-loop and reset operations.
Technical specifications
| Parameter | Specification |
|---|---|
| Channel count | Scalable 8 × N |
| Standard channel products | PhotonSQUID-Ch1 / PhotonSQUID-Ch8 |
| White voltage noise | Better than 0.5 nV/√Hz |
| Open-loop bandwidth | >1 MHz |
| SQUID bias current range | 0–200 μA |
| SQUID bias voltage range | 0–1000 μV |
| Built-in current source range | 2 mA |
| Built-in TEST signal | 0–11 V, 10 Hz calibration triangle wave |
| Heater output | MAX 15 V / 100 mA |
| Closed-loop FLL bandwidth | >100 kHz |
| Open-loop Amp-mode gain | MAX 10000 |
| Output signal range | ±10 V |
| Power supply | 220 VAC |
| Communication | Standard Modbus protocol, optical-fiber communication, electrical isolation |
| Software functions | Parameter adjustment; FLL control (open-loop, closed-loop, reset) |
| FTC-01 / FTC-08 controller dimensions | 350 × 200 × 75 mm |
| FTL-01 unit dimensions | 170 × 56 × 34 mm |
| FTC-08 unit dimensions | 270 × 122 × 80 mm |
Control software
Use the main window of PhotonSQUID FLLCONTROL to adjust common electronics settings, device bias, the operating point and FLL operation.

Configuration and integration
Choose a configuration for the SQUID sensor family, channel count and open-loop or closed-loop readout requirements. PhotonSQUID-Ch1 and PhotonSQUID-Ch8 are standard channel products; confirm expansion and controller / unit combinations with the technical team.


