中文EN

Cryogenic silicon diode thermometer

DT-series silicon-diode sensors use a standard voltage–temperature response over 1.8–325 K. They offer increased sensitivity below 30 K and good interchangeability; individual calibration is not required for general applications.

Product details

DT series · Cryogenic temperature sensors

Silicon-diode sensors with a standard voltage–temperature response over 1.8–325 K.

DT sensors use a silicon-diode chip for a stable voltage–temperature response from 1.8–325 K. Low excitation current limits self-heating. Standard leads, bare dies and sapphire-mounted packages address different installation needs.

1.8–325 KMeasurement range
10 μARecommended excitation current
±15 mKTypical repeatability at 77 K
3 typesSensor packages

Core capabilities

  • Low excitation current limits self-heating.
  • High sensitivity in the cryogenic region.
  • Standard curves support sensor interchangeability.
  • Individual calibration is available for higher accuracy.

Technical specifications

ParameterDT series
Standard temperature range1.8–325 K
Recommended excitation current10 μA ±0.1 μA
Maximum reverse voltage70 V
Power at 10 μA excitation16 μW @4.2 K;10 μW @77 K;5 μW @300 K
SD package response time10 ms @4.2 K;100 ms @77 K;200 ms @305 K
Repeatability at 77 K±15 mK
Individual calibration accuracy±20 mK @2 K–77 K;±40 mK @77 K–305 K
Package optionsDT-T0 standard leads; DT-BR bare die; DT-SD sapphire mount

Applications

Cryostat thermometryMeasures shield and sample-holder temperatures at the stages of 4 K, 1 K and 300 mK systems.
Superconducting device testingLow-self-heating temperature monitoring.
Cryogenic optical experimentsMonitors samples, shields and optical mounts.
Sensor replacementStandard curves support interchangeable sensors and system maintenance.

Configuration and options

DT sensors are recommended only for low magnetic fields. Specify magnetic fields, radiation or local heating and the mounting arrangement when selecting sensors.