HEMT-based cryogenic amplifiers support operation down to 20 mK. At specific frequencies they offer aA/√Hz current noise and sub-nV/√Hz voltage noise. Applications include cryogenic detector readout, scanning tunneling microscopy and quantum computing.
Product details
LTA series · Cryogenic low-noise amplification
Amplifies weak RF signals at low temperature to reduce the effect of downstream electronics noise.
LTA amplifiers operate at 40–325 K for cryogenic devices, quantum materials and detector readout. LTA 1 covers 0.1 MHz–1 GHz and LTA 2 covers 0.3 MHz–5 GHz. Select by bandwidth, noise temperature and gain.
25 KLTA 1 noise temperature
5 GHzLTA 2 upper frequency
>30 dBGain at 77 K
40–325 KOperating temperature
Core capabilities
- Low-noise RF amplification at cryogenic temperatures.
- SMA input/output and a 3-pin DC interface simplify integration.
- Two models cover MHz to 5 GHz measurements.
- Can serve as a front-end stage between cold detectors and room-temperature acquisition.
Technical specifications
| Parameter | LTA 1 | LTA 2 |
|---|---|---|
| RF bandwidth | 0.1 MHz–1 GHz | 0.3 MHz–5 GHz |
| Noise temperature | 25 K @40 K | 150 K @300 K |
| Noise figure | 0.36 dB @40 K | 1.8 dB @300 K |
| Gain at 77 K | >30 dB | 35 dB |
| Operating temperature | 40–325 K | 40–325 K |
| Typical DC consumption | 3.5 V / 6 mA | 3 V / 25 mA |
| RF connector | SMA (female) | SMA (female) |
| Input power | −10 dBm | −10 dBm |
Applications
SNSPD and cryogenic detector readoutImproves weak-pulse signal-to-noise ratio.
Superconducting quantum-device measurementsAmplifies cryogenic microwave and RF signals.
Quantum-material RF measurementsImproves low-temperature transport and resonance measurement SNR.
Cryogenic electronicsA front-end amplification stage between cold and room-temperature electronics.
Configuration and options
Noise temperature and gain depend on operating temperature, frequency and source impedance. Input power must not exceed −10 dBm. Include supply and thermal connections in the system design.

